Troubleshooting - Omron V400-H111 User Manual

Section 5

Troubleshooting

Troubleshooting
Status
The POWER indicator is not
lit.
The video monitor image is
not clear.
Cannot write data to Memory
Card
The saved data is corrupted.
The time stamp on saved data
is not correct.
Cannot communicate with the
host device.
V400-H111/211
76
User's Manual
Cause and countermeasures
The power line is not connected properly.
Insufficient power
Some pixels on the monitor may not light and some may always light.
This is a result of the monitor's construction and does not indicate a
malfunction.
The write-protect switch on the Memory Card is ON.
The Memory Card capacity is insufficient.
The Memory Card is damaged.
The Memory Card has not been formatted.
The Memory Card is the wrong type.
The Memory Card was removed while it was being accessed.
The clock is not set correctly.
The clock is factory set to Japanese Standard Time. Set the clock as
required.
The cable model is incorrect.
The cable connections are loose.
The communications settings are not correct.
Page
p.29
-
-
p.41
p.60
p.20
p.60