Omron V400-H111 User Manual page 30

Section 2
Installation and Connections
Connecting the Cable to the Host Device
1.
Connect the cable connector to the RS-232C
interface on the host device.
Make sure that the connector is oriented correctly and not
inserted at an angle. Secure the connector using the
screws on both sides of the connector.
Removing the Cable from the Host Device
1.
Remove the cable.
Loosen the screws on both sides of the connector and pull
the connector out straight.
Loosen the screws sufficiently on both sides of the
connector to remove it. Do not remove the
connector by force.
V400-H111/211
28
User's Manual