Advertisement
Ordering information
Motion controller
Name
MECHATROLINK-II Trajexia motion control unit
MECHATROLINK-II - related devices
Name
MECHATROLINK-II cables
MECHATROLINK-II terminator
MECHATROLINK-II interface units For Sigma-II series servo drives. (Firmware version 38 or later)
MECHATROLINK-II repeater
Servo system
Note: Refer to servo systems section for detailed information
Frequency inverters
Note: Refer to frequency inverters section for detailed information
Computer software
Specifications
Trajexia Studio V1.0 or higher (Available with CX-One license)
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
Cat. No. I54E-EN-01
Motion controllers
6
Remarks
0.5 meter
1 meter
3 meters
5 meters
10 meters
20 meters
30 meters
Terminating resistor
For Varispeed V7 inverter
(for inverter version support contact your OMRON sales office)
For Varispeed F7, G7 inverter
(for inverter version support contact your OMRON sales office)
When 17 or more axes are connected to the MECHATROLINK-II the repeater is required
In the interest of product improvement, specifications are subject to change without notice.
Model
CJ1W-MCH72
Model
JEPMC-W6003-A5
JEPMC-W6003-01
JEPMC-W6003-03
JEPMC-W6003-05
JEPMC-W6003-10
JEPMC-W6003-20
JEPMC-W6003-30
JEPMC-W6022
JUSP-NS115
SI-T/V7
SI-T
JEPMC-REP2000
Model
CX-One
11
Motion controllers
Advertisement
