Ordering Information - Omron SGE Series Manual

SGE/SCC

Ordering Information

Edge Controller
Appearance
Safety Edge
Appearance
*1. For dimensions including L-shaped base, refer to "Dimensions/Terminal Arrangement" on page 14.
*2. Values of actuation distance are characteristic values tested according to EN 1760-2 using a test object of ϕ80 mm and actuating point C3
under a test temperature of 20°C and test speed v = 10 mm/s. Refer to "Characteristics" on page 11 for details.
8
Safety
Auxiliary output
output
SPST-NO
(One-shot timer that turns ON between
two and three seconds after the
application of pressure to the safety edge)
DPST-NO
SPST-NO
(Kept ON during the application of
pressure to the safety edge)
Cross-sectional
Actuation
dimensions
distance
(including a standard
* 2
mounting base) * 1
15 mm x 34 mm 2.6 mm
25 mm x 39 mm 3.9 mm
25 mm x 60 mm
7.4 mm
25 mm x 60 mm
25 mm x 74 mm
(including sealing cover)
35 mm x 80 mm 5.2 mm
Ratings Terminal
24 VDC Screw terminals
Material Model
TPE SGE-125-@-@
SGE-225-@-@ (L)
SGE-245-@-@ (L)
EPDM
SGE-245L-@-@ (L)
SGE-365-@-@ (L)
Model
SCC-1224
SCC-1224ND
Specification
(Cable)
@ (-@)
@ (-@)
@ (-@)
@ (-@)
@ (-@)