Trajexia Tools
4.3
Connection to the TJ1-MC__
You need a patch or crossover Ethernet cable to connect the PC to
the TJ1-MC__.
1. Connect the Trajexia system to the mains power supply.
2. The IP address and subnet mask of the TJ1-MC__ show 3
times in the LED display (A). The default IP address of the TJ1-
MC__ is 192.168.0.250. The default subnet mask is
255.255.255.0.
3. If you need to see the IP address and the subnet mask of the
TJ1-MC__ again, set the power of the Trajexia system off and
then again on.
4. Connect the Ethernet cable to the Ethernet port of the PC.
5. Connect the Ethernet cable to the Ethernet port of the TJ1-
MC__. The IP address of the TJ1-MC__ shows 4 times in the
LED display.
QUICK START GUIDE
fig. 11
A
29