Table of Contents
Advertisement
Specific Error and Their Remedies
2-22
The errors that occur specifically with computer link systems that use Mitsubishi A
series PCs are described below. For details on errors other than those indicated
below, refer to the Operation manual for the PT.
Message
S Due to noise, the data has
PC Number
error
been changed on the transmis-
sion line.
S The station No. at the PC side
Exchange No.
error
has been changed.
S The PC has sent erroneous
data.
S Due to noise, the data has
been changed on the transmis-
sion route.
S The PC has sent erroneous
Sum check
error
data.
S Due to noise, the data has
been changed on the transmis-
sion line.
Cause
S If the system is used at a site
S Set the station No. at the PC
S Check the operation at the PC
S If the system is used at a site
S Check the operation at the PC
S If the system is used at a site
Chapter 2-5
Corrective Action
subject to a lot of noise, use
cables with protection against
noise on the transmission
route.
side to "0".
side.
subject to a lot of noise, use
cables with protection against
noise on the transmission
route.
side.
subject to a lot of noise, use
cables with protection against
noise on the transmission
route.
Advertisement
Table of Contents
