Table of Contents
Advertisement
Specific Error and Their Remedies
2-5
Specific Errors and Their Remedies
Setting Errors
Reception Errors
This chapter describes the specific errors that may occur when using the PT in a
computer link system that uses Mitsubishi A series PCs, and the remedies to
employ when they occur.
If an area that does not exist in the PC is specified when creating a PT screen with
the support tool, the screen shown below is displayed during PT operation.
Setting error
XXXXX
YYYYY
XXXXX:
Device type
YYYYY :
Device number
If this happens, first check that the area at the PC being used has been secured,
then set the correct device.
If a reception error occurs during PT operation, the screen shown below is dis-
played.
Receive error
Confirm
Chapter 2-5
<Error details>
SCI. parity error
SCI. overrun error
SCI. framing error
Buffer overflow
Time out
NAK reception error
PC No. error
Station No. error
Sum value error
2-21
Advertisement
Table of Contents
