Table of Contents
Advertisement
Setting
2-3
Setting
Settings at the PT
Reference: Set the other memory switches in accordance with the conditions of use.
2-10
This chapter describes the settings required at each device in order to use a com-
puter link system that uses Mitsubishi A series PCs.
Make the following settings in the PT's maintenance mode by using the memory
switches. When using NT30/NT30C or NT620S/NT620C, install the system pro-
gram for Mitsubishi A computer links in advance using the "NT series system in-
staller".
Item
Port select (NT30/NT30C only)
Comm. Type (*)
Baud Rate
PC type
*: The screen representation of the items to be set differs a little according to the
PT model.
For the "PC type" item, set the type of CPU module as follows.
Setting
AnN
A0J2CPU
A1SCPU
A2SCPU
A3NCPU
AnA
A2ACPU
A3ACPU
AnU
A2UCPU
A2USCPU
A3UCPU
Setting
RS-232C or RS-422
Computer link
9600 bps or 19200 bps
AnN, AnA, or AnU
CPU Module
A0J2HCPU
A1SJCPU
A2NCPU
A2NCPU-S1
A3HCPU
A3MCPU
A2ACPU-S1
A2UCPU-S1
A2USCPU-S1
Chapter 2-3
Advertisement
Table of Contents
