Setting - Omron PC CONNECTION - 04-1997 Operation Manual

Setting

3-3 Setting
Settings at the PT
Reference: Set the other memory switches in accordance with the conditions of use.
3-6
This chapter describes the settings required at each device in order to use the pro-
gramming console connector of a Mitsubishi FX series PC.
Make the following settings in the PT's maintenance mode by using the memory
switches. When using NT30/NT30C, install the system program for Mitsubishi FX
in advance using the "NT series system installer".
F When using NT20S
Item Setting
Comm. Type With FX
With FX
With FX
With FX
F When using NT30/NT30C
Item Setting
Port select RS-232C
Comm. Type With FX
With FX
With FX
With FX
:MELSEC-FX0
0
:MELSEC-FX0N
0N
:MELSEC-FX1
1
, FX :MELSEC-FX2
2 2C
:MELSEC-FX0
0
:MELSEC-FX0N
0N
:MELSEC-FX1
1
, FX :MELSEC-FX2
2 2C
Chapter 3-3