Omron NS - HOST Connection Manual page 31

■Confirm command results
Under certain conditions e.g. communications writing disabled, it can happen that a
selected Smart Active Parts instruction cannot be executed.
But, when performing the broadcast, no response is given. In that case there is no
check as to whether the action was completed successfully or not.
Theref,ore adopt a method that checks if the operation was carried out properly, e.g.
lamp indication.
Model
Common
E5ZN
E5□R
Title
(operating instruction)
Communications writing
disabled
Communications writing
enabled
run
stop
AT execute
AT cancel
Writing mode: back-up
Writing mode: RAM
Move to setup area 1
auto
manual
Cancel alarm 1 latch
Cancel alarm 2 latch
Cancel alarm 3 latch
Cancel all alarm latches
Cancel alarm latch
SP mode: local SP
SP mode: remote SP
Select bank: 0 to 7
AT execute
(confirm executing PID
group No.)
Addresses to be monitored
ch1 CO0001.25
ch 2 CO 0101.25
ch1 CO 0001.24
ch 2 CO 0101.24
ch1 CO 0001.23
ch 2 CO 0101.23
ch1 CO 0001.20
ch 2 CO 0101.20
ch1 CO 0001.22
ch 2 CO 0101.22
ch1 CO 0001.26
ch2 CO 0101.26
ch1 C00001.12 to 15
ch2 C00101.12 to 15
*1
ch1 C00001.12 to 15
ch 2 C00101.12 to 15
ch 3 C00201.12 to 15
ch 4 C00301.12 to 15
*1
ch1 C00001.27
ch 2 C00101.27
ch 1 C40408
ch 2 C41408
ch 3 C42408
ch 4 C43408
ch 1 C4040A
ch 2 C4140A
ch 3 C4240A
19