Omron NS - HOST Connection Manual page 20

2-4 Setting Project
With this function, you set projects needed to connect temperature controllers.
Select Setting - System Setting. System Setting dialogue opens.
Select tab Comm - All.
Select Temperature Controller from the pull down menu for Serial Port A ( or Serial B).
Select tab Serial Port A (or Serial Port B) and set baud rate.
Selectable baud rate values are:
Baud rates 57600 / 115200 are for future use. Present temperature controllers cannot
operate at these rates.
8
2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200 (in bps).