Omron NS - HOST Connection Manual page 19

2-3-4 CJ1W-CIF11 setting
Dip switch setting
Pin No.
1
2
3
4
5
6
2-3-5 NS setting
Before you can connect temperature controllers, you need to store the required project in the
NS. For project setting, refer to '2-4 project setting'.
With communications settings under system menu, you can set the speed of
communications.
Baud rate
Of these values, 57600 / 115200 are for future use.
Present temperature controllers cannot operate at these rates.
Set PT unit and temperature controller baud rate values to match each other.
Function
Terminal resistance
select ON/OFF
Switch between
system
Switch between
system
Not used
RD control by RS
select ON/OFF
SD control by RS
Select ON/OFF
2400 / 4800 / 9600 / 19200 / 38400 / 57600 /115200
setting
ON
OFF
2/4 line ON
2/4 line ON
-
OFF
ON
Terminating resistance (on both
ends of the communications
path)
No terminating resistance (other
than both ends
communications path)
2 line system
RS control function ON
bps
of the
7