Functions - Omron G3ZA - MANUAL 2 User Manual

This section describes the functions of the G3ZA so that these functions can be used effectively according to the
application.
4-1 Setup Procedure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4-2 Selecting the SSR (Control Method) 4 or 8-channel Models)
4-3 Selecting the CT (4-channel Models Only)
4-4 Allocating CTs (4-channel Models Only)
4-5 Detecting Heater Burnouts (4-channel Models Only) . . . . . . . . . . . . . . . . . .
4-6 Detecting Heater Overcurrent (4-channel Models Only) . . . . . . . . . . . . . . . .
4-7 Detecting SSR Short-Circuits (4-channel Models Only) . . . . . . . . . . . . . . . .
4-8 Detecting Communications Timeouts (4 and 8-channel Models). . . . . . . . . .
4-9 Setting the Soft Increase and Soft Decrease Times (4 and 8-channel Models)
4-10 Changing the Manipulated Variable (4 and 8-channel Models) . . . . . . . . . . .
4-11 Offsetting the Control Output's ON Timing (4 and 8-channel Models) . . . . .
4-12 Turning OFF a Control Output (4 and 8-channel Models) . . . . . . . . . . . . . . .
4-13 Setting the Abnormal Current Detection Delay (4 and 8-channel Models)
4-14 Setting Operation at Error (4 and 8-channel Models). . . . . . . . . . . . . . . . . . .
4-15 Monitoring the Effective Current
V2
V2
. . . . . . . . . . . . . . . . . . . . . .
V2
. . . . . . . . . . . . . . . . . . . . . . .
V2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 4

Functions

30
. . . . . . . . 31
33
35
36
43
45
48
V2
49
50
51
52
V2
52
53
54
29