Omron G3ZA - MANUAL 2 User Manual page 78

Specifications
Specifications
Ratings
Control power supply voltage
Control power supply voltage range 85 to 264 VAC
Power consumption
Load power supply voltage
Load power supply voltage range
Manipulated variable inputs
Trigger outputs
Alarm output
Indications
Ambient operating temperature
Ambient operating humidity
Storage temperature
Elevation
Accessories
Model
CT input
Performance
Current accuracy
Insulation resistance
Dielectric strength
Vibration resistance
Shock resistance
Weight of main body
Degree of protection
Memory backup
Installation environment
Approved standards
Appendix
100 to 240 VAC (50/60 Hz)
Approx. 5.9 W
100 to 240 VAC
400 to 480 VAC
Controllers for 100 to 240 VAC: 75 to 264 VAC
Controllers for 400 to 480 VAC: 340 to 528 VAC
0.0% to 100.0% (via RS-485 communications)
One for each channel, 12 VDC ±15%, max. load current: 21 mA (with built-in
short-circuit protection circuit)
NPN open collector, one output
(Max. load voltage: 30 VDC, max. load current: 50 mA)
LED indicators
−10 to 55°C (with no icing or condensation)
25% to 85%
−25 to 65°C (with no icing or condensation)
2,000 m max.
Instruction Sheet
E54-CT1/E54-CT3
Single-phase between 0 and 50 A AC
Current range:0 to 50 A: ±3 A max.
0 to 150 A: ±9 A max.
0% to 100%: ±6% max.
100 MΩ min. (at 500 VDC) between primary and secondary
2,000 VAC, 50/60 Hz for 1 min between primary and secondary
Vibration frequency: 10 to 55 to 10 Hz, acceleration: 50 m/s
2
300 m/s three times each in six directions along three axes
Approx. 200 g (including terminal cover)
IP20
EEPROM (non-volatile memory), write life: 100,000 writes
Overvoltage category III, pollution degree 2 (according to IEC 60664-1)
UL508 (Listing), CSA22.2 No. 14
EN50178
EN61000-6-4 (EN55011: 1998, A1: 1999 Class A, Group 1)
EN61000-6-2: 2001
G3ZA-CT150L
Single-phase between 0 and 150 A AC
2
in X, Y, Z directions
Appendix
61