Ordering Information; List Of Models - Omron E5ZN Manual

Ordering Information

■ List of Models

Name Power No. of
supply control
points
Temperature
Controller (See 24 VDC 2
note 1.)
Note: 1. Terminal Units are required for wiring. Purchase separately.
2. When connecting the load of the controlled system, heat control output or cool control output can be allocated to the control output or auxiliary
output. When connecting a recording device or Digital Panel Meter, transfer output can be allocated to control output or auxiliary output 3 or 4 of
analog output models.
3. When using the heater burnout alarm, purchase a Current Transformer (CT) separately.
4. When using heating and cooling control functionality, the auxiliary output will be either heating control output or cooling control output.
5.
Analog input and infrared temperature sensors (ES1A-A) can also be used with thermocouple models
Name
24
Terminal Unit
(Includes bus system with-
out backplane.)
18 (See note 1.)
Note: 1. When using 2 or more E5ZNs mounted side-by-side, use the E5ZN-SCT18S-500 for the second and subsequent Units. When using
E5ZNs separately, be sure to use the E5ZN-SCT24S-500.
2. Two End Plates are provided with E5ZN-SCT24S-500 Terminal Units. When mounting to a DIN track, be sure to mount End Plates on
both sides.
Current Transformer (CT) (Order
Separately)
Model E54-CT1
Diameter 5.8 dia.
Terminal Cover
Model E53-COV12
Type For SCT24S-500 models
Note: The Terminal Cover comes with the Terminal Unit and does not
have to be purchased separately.
Sockets (for Setting Display Unit - Order Separately)
Model P2CF-11
Type
Front-connecting socket
Note: Refer to the following manual for precautionary information and other information necessary to use the E5ZN: E5ZN Temperature Controller
Operation Manual (Cat. No. H113).
I-130
Modular Temperature Controller
Control Auxiliary
output output
Transistor
output: 2 pts
(sinking)
Voltage
output
Transistor
(for SSRs)
output: 2 pts
(sourcing)
Heater
burnout alarm
Transistor
(See note 3.)
output: 2 pts
(sinking)
Transistor
output
Transistor
output: 2 pts
(sourcing)
Analog Transistor Transfer out-
output output: 2 pts put (linear
(current (sinking) voltage out-
output) put)
(See note 2.) (See note 2.)
Transistor
output: 2 pts
(sourcing)
No. of terminals
Equipped with communications terminals for power supply, commu-
nications, and setting devices.
Not equipped with communications terminals for power supply,
communications, and setting devices.
E54-CT3
12.0 dia.
E53-COV13
For SCT18S-500 models
P2CF-11-E
Front-connecting socket
(with finger protection)
E5ZN
Functions Communica-
tions func-
tions
Heating or
heat/cool
control is
selectable
RS-485
(See note 4.)
Event input: 1
point per Unit
Functions
Setting Display Unit (Order Separately)
Name
Setting Display Unit 24 VDC
(See note.)
Note: Purchase sockets for wiring (shown on page 130) separately.
P3GA-11
Back-connecting socket
Input type (See Model
note 5.)
Thermocouple E5ZN-2QNH03TC-FLK
Platinum
resistance E5ZN-2QNH03P-FLK
thermometer
Thermocouple E5ZN-2QPH03TC-FLK
Platinum
resistance E5ZN-2QPH03P-FLK
thermometer
Thermocouple E5ZN-2TNH03TC-FLK
Platinum
resistance E5ZN-2TNH03P-FLK
thermometer
Thermocouple E5ZN-2TPH03TC-FLK
Platinum
resistance E5ZN-2TPH03P-FLK
thermometer
Thermocouple E5ZN-2CNF03TC-FLK
Platinum
resistance E5ZN-2CNF03P-FLK
thermometer
Thermocouple E5ZN-2CPF03TC-FLK
Platinum
resistance E5ZN-2CPF03P-FLK
thermometer
.
Model
E5ZN-SCT24S-500
E5ZN-SCT18S-500
Power supply Model
E5ZN-SDL
Y92A-48G
Terminal cover for finger
protection