Table of Contents
Advertisement
Quick Links
Small Sealed Switch
D4E-@N
Slim and Compact Switch with Better Seal
and Ensuring Longer Service Life than D4E
• Flat springs with an improved lever ratio of the built-in switch en-
sure smooth snap action and long life expectancy.
• Protection cover protects the built-in switch from dust and oil.
Plunger incorporates a tough seal cap that lasts for a long time.
• One touch connector eliminates need for tedious wiring opera-
tions and reduces downtime for wiring and maintenance (mod-
els with standard, easy-to-use screw terminals are also
available).
• Minute load model with gold cladding is optimal for electronic
control.
• Molded terminal types as well as molded terminal types with op-
erating indicator lamps are available for screw terminal systems.
• No difference in mounting pitch and characteristics between
D4E-@N and D4E models.
Model Number Structure
■ Model Number Legend
D4E-@@@@@N
1 2
3
4
1. Rated Current
1:
5 A at 125 VAC
(1 A at 125 VAC/30 VDC for model with a connector)
2:
0.1 A at 125 VAC
(0.1 A at 125 VAC/30 VDC for model with a connector)
2. Actuator
A:
Roller plunger
B:
Crossroller plunger
C:
Plunger
D:
Sealed roller plunger
E:
Sealed crossroller plunger
F:
Sealed plunger
G:
Roller lever
H:
One-way action roller lever
3. Terminals
00:
AC connector
10:
DC connector
20:
Screw terminals without a cable
21:
Screw terminals with a cable (right-hand)
22:
Screw terminals with a cable (left-hand)
23:
Molded terminals with a cable (right-hand)
24:
Molded terminals with a cable (left-hand)
(Cable is S-FLEX VCTF 3 m)
4. Operation Indicator
L:
Neon lamp (250 VAC)
L1:
LED (12 VDC)
L2:
LED (24 VDC)
L3:
LED (48 VDC)
Note: 1. Only the molded terminal models can be equipped with an
operation indicator.
2. Desired Switches may not be manufactured depending on
the combination between molds and indicators. Contact our
sales representative for further information.
Small Sealed Switch
D4E-@
N
F-31
Advertisement
Table of Contents
Related Manuals for Omron D4E-N
Summary of Contents for Omron D4E-N
- Page 1 Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E • Flat springs with an improved lever ratio of the built-in switch en- sure smooth snap action and long life expectancy. • Protection cover protects the built-in switch from dust and oil.
-
Page 2: Ordering Information
2) roller lever Note: 1. When ordering, specify the current type by replacing the blank box of the model number with 0 for AC connector or 1 for DC connector. 2. Approved by UL and CSA. 3. For the plunger and lever actuator models, the NC and NO terminal indicators are reversed. -
Page 3: Specifications
DC-12 0.1A/24 VDC 0.5 A 23, 24 DC-12 0.1A/48 VDC 0.5 A Note: 1. @: Actuator variation of item II 2. AC-14 0.5 A/125 VAC means as follows: Applicable category: AC-14 Rated operating current (I ): 0.5 A Rated operating voltage (U... - Page 4 2. The above ratings may vary depending on the model. Contact your OMRON representative for further details. 3. Durability values are calculated at an operating temperature of 5 C to 35 C, and an operating humidity of 40% to 70%. Contact your OMRON sales representative for more detailed information on other operating environments.
-
Page 5: Engineering Data
MD (reference (0.1 mm) (0.3 mm) (0.3 mm) value) 30 0.8 mm 23.1 0.8 mm 34.3 0.8 mm Note: The values given in parentheses are reference values. ■ Contact Form Screw Terminal Type Connector Type Plunger Lever COM NO COM NC... - Page 6 Nomenclature Bearing The actuator strength has been increased to 4,903 N Movable Plunger (D4E: 294 N) in order to prevent faulty resetting of the bearing, which may occur when the roller is pressed with excessive force. Rubber Cap (NBR) Rubber cap provides a tight seal and...
- Page 7 3. A 3-m lead wire cable equivalent to the 3-conductor VCTF S-FLEX cable (0.75 mm , 7 mm in dia.) is provided. 4. A 5.8- to 7.6-dia. cable can be applied to the seal rubber for the lead wire outlet. Roller Plunger 11 dia.
- Page 8 7.8 dia. stainless 33±0.15 steel plunger D4E-1C10N +0.2 dia. Two, panel mounting nut D4E-2C00N holes M14 x 1 2.5 mm thickness, 17 mm D4E-2C10N width across flats 4.7 hole +0.2 21.5 28.4 (60) M12 x 1 Plunger D4E-1C20N (See note 4.) D4E-2C20N (See note 4.)
- Page 9 Sealed Cross Roller Plunger (46) D4E-1E00N D4E-1E10N 11 dia. x 4.7 stainless 33±0.15 sintered alloy roller D4E-2E00N D4E-2E10N Sealed rubber 4.7 holes +0.2 21.5 4.5 28.4 M12 x 1 +0.2 dia. (60) holes Sealed Cross Roller Plunger D4E-1E20N (See note 4.) (46) D4E-2E20N (See note 4.)
-
Page 10: Roller Lever
Roller Lever (46) D4E-1G00N 9.5 dia. x 4.8 stainless 33±0.15 D4E-1G10N sintered alloy roller D4E-2G00N 4.7 holes D4E-2G10N 19.4 +0.2 dia. holes +0.2 21.5 28.4 (60) M12 x 1 Roller Lever (46) D4E-1G20N (See note 4.) 33±0.15 9.5 dia. x 4.8 stainless D4E-2G20N (See note 4.) - Page 11 The molded-terminal model is available with right-hand, left-hand and underside leads and is recommended for use where the Switch is exposed to dust, oil or moisture. It can be used like a screw-terminal model (with a cable), and the dimensions and operating characteristics are the same as for standard models.
-
Page 12: Internal Circuit
LED indicator is provided. As a rectifier stack is incorporated, into the unit and no directionality exists for connection of + and –, this type can also be operated on Voltage ratings of LED indicators are as shown in the table below. - Page 13 Do not change the operating position by remodeling the actuator. Wiring Clamp fitting If the clamp is properly inserted up to the full depth, it will not slide When wiring screw terminals, M3-size round solderless terminals out easily. Be sure to carefully confirm all the above items.
-
Page 14: Tightening Torque
Switch mounting screw (M4) 1.18 to 1.37 N·m ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. In the interest of product improvement, specifications are subject to change without notice.