Available Pc - Omron CX-PROGRAMMER - INTRODUCTION GUIDE Introduction Manual

Available PC

Hardware Requirements
OS
Item
PC
CPU
Memory *2
Hard disk space
Display
CD-ROM /DVD-ROM drive
Communications Port
*1: The following restrictions apply when CX-Programmer is used with Windows Vista.
Help files with an HLP file name extension cannot be accessed. These help files can be accessed if the program distributed by
Microsoft for Windows Vista is installed. Refer to the Microsoft homepage listed below or contact Microsoft for details on installing the
file. The download page is automatically displayed if an HLP help file is opened while the user is connected to the Internet.
http://support.microsoft.com/kb/917607/en-us
*2: Required memory (RAM) size depends on the size of your programs to be created. If the required memory (RAM) size is larger than
your PC's memory (RAM) size, operation of CX-Programmer might be slowed down.
For details of PC in which CX-One can be installed, refer to "CX-One Setup Manual", Section 2 "Installation and Uninstallation".
Windows 2000 Service Pack 2 or later
/Windows XP
IBM PC/AT Compatible
DOS/V (IBM AT compatible) computer with a
Pentium II 333 MHz processor or higher.
Pentium III 1GHz or higher is recommended.
256MB or higher required.
512MB or higher is recommended.
550MB or more free space
800X600 SVGA or grater
At least one drive
At least one USB Port or RS-232C Port
Windows Vista *1
IBM PC/AT or compatible with a processor
recommended by Microsoft.
Processor recommended by Microsoft.
1 GB or higher is recommended.
512MB or higher required.
1GB or higher is recommended.