Monitoring - 2 Monitoring Many Locations In Program At Once; Monitoring - 3 Monitoring In Hex - Omron CX-PROGRAMMER - INTRODUCTION GUIDE Introduction Manual

Online
Online
to Transfer
to Transfer
Move the mouse
Move the mouse
pointer to the arrow
pointer to the arrow
position shown in the
position shown in the
right figure and drag
right figure and drag
the cursor down with
the cursor down with
the left mouse button
the left mouse button
pressed.
pressed.
The screen is divided
The screen is divided
into two panes up
into two panes up
and down, and you
and down, and you
can display any
can display any
address in two panes
address in two panes
respectively by using
respectively by using
the scroll bars.
the scroll bars.
Shown in decimal
Shown in hex
Monitoring
Monitoring

4. Monitoring - 2 Monitoring Many Locations in Program at Once

You can split Ladder Window and monitor more than one location in a program at once.
Click to switch the display format of the present value of IO memory between
Force On
Force On
Force Off
Force Off

5. Monitoring - 3 Monitoring in Hex

Program
Program
Check
Check
decimal and hexadecimal.
Online
Online
Edit
Edit