Checking The Operating Mode - Omron CJ2 CPU - REV 10-2010 User Manual

3-2-2

Checking the Operating Mode

Front-panel Indicator on the CPU Unit
The RUN indicator on the front of the CPU Unit indicates the operating mode as described below.
Operating mode
PROGRAM mode
RUN or MONITOR mode Lit green
CX-Programmer
You can check the operating mode in the project tree or status bar of the CX-Programmer.
Project Tree
Offline
Status Bar
Additional Information
An external RUN output can be achieved by using the CJ1W-PA205R Power Supply. The RUN
output (contact output) on the CJ1W-PA205R will turn ON in RUN or MONITOR mode unless
there is a fatal error.
CJ2 CPU Unit Software User's Manual
RUN indicator on CPU Unit
OFF
Online
The operating mode is displayed here.
3 CPU Unit Operation
Remarks
---
Use the CX-Programmer to see if the mode is RUN or
MONITOR mode.
The CPU Unit's operating
mode is displayed.
The average cycle time will be displayed if
the CPU Unit is in RUN or MONITOR mode.
3
3-9