A-8-1 Cj2H Cpu Unit; A-8 Functions Supported For Unit Versions - Omron CJ2 CPU - REV 10-2010 User Manual

A-8 Functions Supported for Unit
Versions
A-8-1 CJ2H CPU Unit
Functions Supported for Unit Version 1.3 or Later
CX-Programmer version 9.1 or higher must be used to enable using the functions added for unit ver-
sion 1.3.
Models
Function
Special CJ1W-NC281/NC481/NC881
instruc- Position Control Units: PCU
tions for HIGH-SPEED POSITIONING
certain (NCDMV(218))
Special I/O
CJ1W-NC281/NC481/NC881
Units
Position Control Units: PCU
POSITIONING TRIGGER
(NCDTR(219))
New spe- SIGNED AREA RANGE
cial COMPARE: ZCPS(088)
instruc-
DOUBLE SIGNED AREA
tions
RANGE COMPARE:
ZCPSL(116)
Unit Version 1.2 or Later
CX-Programmer version 8.3 or higher must be used to enable using the functions added for unit ver-
sion 1.2.
Function
EM Area Force-setting/resetting
Note User programs that use functions of CJ2H CPU Units with unit version 1.2 or later cannot be used with CJ2H
CPU Units with unit version 1.1 or earlier. If an attempt is made to transfer a program that uses any of these
functions from the CX-Programmer to a CPU Unit with unit version 1.1 or earlier, an error will be displayed
and it will not be possible to download to the CPU Unit.
CJ2 CPU Unit Software User's Manual
Units
Unit version Unit version
1.3 or later
Supported.
Supported.
Supported.
Supported.
Unit
Model
Unit version
Supported.
CJ2H CPU Units
CJ2H-CPU6@-EIP and CJ2H-CPU6@
Unit version Unit version
1.2 1.1
Not sup- Not sup-
ported. ported.
Not sup- Not sup-
ported. ported.
Not sup- Not sup-
ported. ported.
Not sup- Not sup-
ported. ported.
CJ2H CPU Units
CJ2H-CPU6
CJ2H-CPU6
Unit version 1.2 or later
Not supported.
Appendices
Unit version
1.0
Not sup-
ported.
Not sup-
ported.
Not sup-
ported.
Not sup-
ported.
@
-EIP
@
Unit versions earlier than 1.2
A-179