Using Ftp Commands; Table Of Commands; Using The Commands - Omron CJ1W-EIP21 - 10-2010 Operation Manual

Using FTP Commands

11-5 Using FTP Commands

11-5-1 Table of Commands

11-5-2 Using the Commands

open
Format
Function
308
This section describes the FTP commands which the host computer (FTP cli-
ent) can send to the FTP server of the EtherNet/IP Unit or built-in EtherNet/IP
port. The descriptions should also apply to most UNIX workstations, but slight
differences may arise. Refer to your workstation's operation manuals for
details.
The FTP commands which can be sent to the EtherNet/IP Unit or built-in Eth-
erNet/IP port are listed in the following table.
Command
Connects the specified host FTP server.
open
Specifies user name for the remote FTP server.
user
Displays the Memory Card file names.
ls
Display the Memory Card file names and details.
dir
Changes a file name.
rename
Creates a new directory in the working directory in the remote host.
mkdir
Deletes a new directory from the working directory in the remote host.
rmdir
Changes the Ethernet Unit work directory to the specified directory.
cd
Changes the working directory at the remote host to the parent direc-
cdup
tory.
Displays the Ethernet Unit work directory.
pwd
Specifies the data type of transferred files.
type
Transfers the specified file from the Memory Card to the local host.
get
Transfers multiple files from the Memory Card to the local host.
mget
Transfers the specified local file to the Memory Card.
put
Transfers multiple local files to the Memory Card.
mput
Deletes the specified file from the Memory Card.
delete
Deletes multiple files from the Memory Card.
mdelete
Disconnects the FTP server.
close
Closes the FTP (client).
bye
Closes the FTP (client).
quit
• The EtherNet/IP Unit or built-in EtherNet/IP port is considered to be the
remote host and the host computer (FTP client) is considered to be the
local host.
• A remote file is a file on the Memory Card or in EM File Memory in the
CPU Unit. A local file is one in the host computer (FTP client).
• The parent directory is the directory one above the working directory.
open [IP_address or host_name_of_FTP_server]
Connects the FTP server. Normally when the FTP client is booted, the FTP
server IP address is specified to execute this command automatically.
Section 11-5
Description