Safety Advice For All Uses - Parkside PFBS 9.6 V - MANUAL 6 Manual

paperclips, coins, keys. nails, screws
or other small metal objects that could
cause the contacts to be bridged.
WARNING!
rechargeable battery units if they are
misused. If this happens, avoid contact
with the fluid. If contact occurs, flush
the affected area with water. Seek
additional medical help if any of the
fluid gets into your eyes.
©

Safety advice for all uses

General safety advice for grinding,
sanding (with sandpaper), wire brushing,
polishing and disc-cutting:
This electrical power tool is intended
for use as a grinding, sanding, wire-
brushing, and disc-cutting machine.
Do not use any accessory not specifi-
cally intended by the manufacturer
for this electrical power tool.
The maximum permitted speed of an
attachment must be at least as high as
the maximum speed indicated for the
electrical power tool.
The external diameter and the thickness
of the attachment must be compatible
with the dimensions of your electrical
power tool.
Fluids may leak out of
Grinding discs, flanges, grinding
wheels or other accessories must fit
exactly on to the spindle of your elec-
trical power tool.
Do not use damaged attachments.
Before every use check attachments
such as grinding discs for loose frag-
ments and cracks, grinding wheels for
cracks, deterioration or excessive
wear and wire brushes for loose or
broken wires. If the electrical power
tool or attachment is dropped, inspect
for damage or change the attachment
for an undamaged one. When you
have inspected and inserted the at-
tachment, position yourself and by-
standers away from the plane of the
rotating attachment and run the device
at maximum speed for one minute.
Wear personal protective
equipment. Use a full face vi-
sor, safety goggles or safety
glasses, depending on the application.
Wear a dust mask, hearing protectors,
safety gloves or special apron capable
of stopping particles of the grinding
medium or workpiece, as appropriate
for the task.
Keep bystanders at a safe distance
from your work area. Anyone entering
the work area must wear personal
protective equipment.
Hold the device by the insulated han-
dle surfaces when you are undertak-