Safety Advice - Parkside PFBS 9.6 V - MANUAL 6 Manual

ing work where there is the danger
of the attachment striking hidden
electricity cables or the device's mains
lead.
Keep the mains lead away from rotat-
ing attachments.
Never lay the electrical power tool
down until after the attachment has
come to a complete standstill.
Do not have the electrical power tool
running while you are carrying it.
Clean the ventilation slots on your
electrical power tool regularly.
Never use the electrical
power tool near inflammable
materials
Do not use attachments that require
the use of coolants.
©

Safety advice

relating to kickback
Maintain a firm grip on the electrical
power tool and position your body
and arms to allow you to resist kick-
back forces. Always use the auxiliary
handle, if provided, to exercise the
greatest possible control over kick-
back forces or reaction torques as the
device builds up to full speed.
Do not place your hands near a rotat-
ing attachment.
Avoid positioning your body in the
area into which the electrical power
tool would move in the event of a
kickback.
Work particularly carefully in the
area of corners, sharp edges etc. to
avoid the attachment bouncing or
snagging on the workpiece. Corners,
sharp edges or bouncing have a ten-
dency to snag the rotating attachment.
Do not use saw-chain woodcarving
discs or toothed discs.