Sennheiser EW 300 IEM G3 Instruction Manual page 13

Rack mounting two To mount two transmitters into a rack using the GA 3 rack adapter:
transmitters
Place the two transmitters side by side upside-down onto a flat surface:
Secure the jointing plate
Secure the rack mount "ears"
To mount the antennas:
Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner.
For more information, visit the ew G3 product pages at www.sennheiser.com.
To mount the transmitters into the rack:
Slide the transmitters into the 19" rack.
Secure the rack mount "ears" to the 19" rack.
Connecting the mains unit
Only use the supplied mains unit. It is designed for the transmitter and ensures safe
operation.
Insert the yellow connector of the NT 2-3 mains unit into the yellow socket
transmitter.
Pass the cable of the mains unit through the cable grip
Slide the supplied country adapter
Plug the mains unit
The
to the transmitters using six recessed head screws (M 3x6).
into a wall socket.
STANDBY button is backlit in red.
The AC 3 antenna combiner incorporates DC distribution to enable simultaneous
powering of up to four transmitters via its BNC sockets. These transmitters do not
require their individual power supply (see also page 12).
Putting the devices into operation
to the transmitters as described on page 9.
.
onto the mains unit
of the
.
11