THOMSON SPEED TOUCH 585 User Manual page 40

Chapter 2
Local Network Setup
Configuring WDS
32
To configure your WDS on the web pages:
Go to the SpeedTouch™ web pages.
1
In the menu select Home Network.
2
Click your WLAN.
3
On the top right, click Configure.
4
If not already done, set a
settings (WEP encryption or no encryption) on your SpeedTouch™ are
the same as on the repeater.
On the Wireless Access Point page, in the Pick a task... list, click Configure
5
WDS.
Select WDS Enabled.
6
In the Pick a task... list, click Scan for wireless access points.
7
A warning will be displayed:.
8
Click OK.
The SpeedTouch™ will scan for access points on the same radio channel.
9
Select your repeater in the List of Accessible Access Points and click Apply.
10
channel and check whether the security
fixed
E-DOC-CTC-20050429-0103 v2.0