TEFAL OV9000 Manual page 30

Code
Oven overheated in oven mode.
E-1
Temperature above 240°C.
Heating problem. Oven has not reached 40°C
E-2
after 3 minutes.
E-3 Hotplate overheated: temperature above 240°C.
Heating problem. Hotplate has not reached 40°C
E-4
after 3 minutes.
E-5 Hotplate sensor.
E-6 Hotplate sensor short-circuit.
E-7 Door closed sensor defective
E-8 Oven temperature sensor short-circuit.
E-9 Water feed problem.
If a problem persists, contact your approved service centre. See list of approved service centres.
Warranty
• This appliance is designed solely for domestic use; any professional or inappropriate use or use not in
accordance with these instructions renders the manufacturer's liability and warranty null and void.
• Carefully read the instructions before using your appliance. Any use that does not conform to the
instructions for use will absolve TEFAL from any liability.
• In accordance with the regulations in force, any waste appliance must be made definitively unusable.
Disconnect and cut the power cord before discarding the appliance.
• Environment Directive 2002/95/EC
Environment protection first !
Your appliance contains valuable materials which can be recovered or recycled.
Leave it at a local civic waste collection point.
If you have any product problems or queries, please contact our Customer Relations Team first for
expert help and advice:
0845 602 1454 - UK
(01) 461 0390 - Ireland
or consult our website - www.tefal.co.uk
Meaning Solution
Turn off and allow to cool.
Contact an approved service centre.
Do not dismantle the appliance.
Turn off and allow to cool.
Contact an approved service centre.
Do not dismantle the appliance.
Contact an approved service centre.
Do not dismantle the appliance.
Contact an approved service centre.
Contact an approved service centre.
Contact an approved service centre.
Check that water tank is properly
in place. Check that water level is
adequate.
Environment
GB
F
F
27