Remove the bottom cover:
1.
Remove the two rubber feet (1).
2.
Remove the four Phillips M2.5 × 8.0 screws (2) from under the feet and the two Phillips M2.0 × 4.0
screws (3) along the bottom edge of the bottom cover.
3.
Use a plastic tool (1) to release the bottom cover (2) from the computer.
4.
Remove the bottom cover (3) from the computer.
To replace the bottom cover, reverse the removal procedures.
Battery
To remove the battery, use this procedure and illustration.
32
Chapter 5 Removal and replacement procedures for authorized service provider parts