Hob Seal - Smeg SE2321TE2 Manual

Instructions for the installer
9.3.2 Over built-in oven
If installed on top of an oven, the latter must be equipped with a cooling fan.
The distance between the hob and the kitchen furniture or other installed appliances must be enough to
ensure sufficient ventilation and air discharge.
If installed above an oven, a space of at least 5 cm must be left between the hob and the top of the
appliance installed below.
opens only on bottom opens on bottom and on rear

9.4 Hob seal

To prevent leakage of liquid between the frame of
the hob and the work surface, place the seal
provided along the entire outer edge of the hob
before assembly.
Do not fix the hob using silicon as this would make it impossible to remove the hob, if necessary, without
damaging it.
53