Switching On A Triple Hot Plate; Accelerator Function - Smeg SE2321TE2 Manual

6.6 Switching on a triple hot plate

To start heating a triple hot plate, after having set the maximum power level
models only), press button
plate has been activated (
adjacent to the power will flash (
Press button or
If button is pressed when the hot plate is at maximum power, the hot plate will switch off (

6.7 Accelerator function

This function can be used to reach the selected heating level more quickly.
The cooking zones will start at maximum power. Once the selected power level is reached, power is
reduced.
6.7.1 Activating the accelerator function
Press buttons and
will flash on the display.
Use buttons and
activated in double or triple mode). The display alternately shows
If no power level is selected within 5 seconds of activating the function
normal status.
Power level set with A
1
2
3
4
5
6
7
8
9
Instructions for the user
. A lighted dot will appear adjacent to the power to indicate the inside hot
or ); press button
or ).
to increase or decrease the required power level.
simultaneously for the zone to be heated using the accelerator function.
to select a power level between 1 and 9 (the cooking zone can also be
Maximum time to
reach (min)
2
3
4
5
6
7
8
10
12
again to fully activate the hot plate. The dot
and the power level just selected.
, the cooking zone returns to
or (on some
).
43