Ventilation; Hob Seal - Smeg SI3842B Manual

Instructions for the installer

8.4 Ventilation

The illustrations below show two examples of installation suitable for proper ventilation and one example
of incorrect installation to be avoided.
Do not obstruct the ventilation grille in front of the product in any type of installation.

8.5 Hob seal

To prevent leakage of liquid between the frame of
the hob and the work surface, place the seal
provided along the entire outer edge of the hob
before assembly.
Do not fix the hob using silicone as this would make it impossible to remove the hob, if necessary,
without damaging it.
47