Secondary Menu (Automatic Control Lock - Showroom - Eco-Logic) - Smeg SE2321TE2 Manual

6.12 Secondary menu (Automatic control lock - Showroom - ECO-logic)

The hob is equipped with a secondary menu for activating or deactivating some parameters:
1 Automatic control lock: on activating this mode, one minute after the last operation by the user, the
controls will automatically be locked (see 6.8 Control lock).
2 Showroom: on activating this mode, the appliance deactivates all the heating elements, while
keeping the control panel active (useful for demonstration purposes in store). To use the hob
normally, set this mode to "n".
If showroom mode has been activated,
3 ECO-logic (on some models only): on activating this mode, the hob electronics will automatically
adjust the power levels to stay within the set maximum power absorbed: 2.8 or 4 kW. To use the hob
at maximum power, set this mode to "n".
6.12.1Changing the settings in the secondary menu
On first installing, within two minutes of powering on the hob, hold down buttons
the first cooking zone (the one near symbol
The cooking zone display will show the number of the setting currently being modified (1: automatic
control lock, 2: showroom, 3: ECO-logic) with its setting at the side (
example, indicates that the automatic control lock is inactive.
Use buttons and
parameter the following may be selected
To advance and change the subsequent settings, press button
If the hob is already installed and in use, cut the power supply to the hob. Switch the power back on and
proceed as indicated above within two minutes.
Instructions for the user
).
to change the setting to "
(2.8 kW),
will display every minute for one second.
: active;
" or to " "; if changing the ECO-logic
(4 kW), (maximum power absorbed).
.
and for
: inactive). For
47