Switching On The Hob; Switching On A Single Hot Plate; Switching On A Double Hot Plate - Smeg SE2321TE2 Manual

Instructions for the user

6.3 Switching on the hob

When not in use, the hob will be completely off. Hold down button for two seconds to switch on the
hob. A LED on the hob will light up to indicate the hob is on.
If no function is activated within 30 seconds of switching on, the hob switches off automatically.
If the control lock function has been activated, after pressing button , the displays will show
or (on some models only). The control lock must be deactivated in order
to switch on the hob, see "6.8 Control lock".

6.4 Switching on a single hot plate

After switching on the hob, press buttons to activate the required hot plate; the display will show
symbol .
Press symbol and the display will show or (depending on the model). This means that the
hot plate is on at maximum power.
Press symbol or to increase or decrease the required power level.
If button is pressed when the hot plate is at maximum power, the hot plate will switch off ( ).
Press the button again to switch on the hot plate. The selection will now be gradual from 1 to 9 or
from 1 to P (on some models only).
In position the hot plate cannot be switched on by pressing button .

6.5 Switching on a double hot plate

To start heating a double hot plate, after having set the maximum power level or (on some
models only), press button . A lighted dot will appear adjacent to the power to indicate the hot plate
has been fully activated.
Press button or to increase or decrease the required power level.
If button is pressed when the hot plate is at maximum power, the hot plate will switch off ( ).
42