Instructions For The User - Smeg SC106-2 Instructions Manual

Instructions for the user

7.3 Description of the controls on the front panel
All the appliance's control and monitoring devices are placed together on the
front panel. The symbols used are described in the table below.
FUNCTIONS AND SYMBOLS SHOWN:
PT1
PT2
programmed cooking
DSP
Door interlock indicator
(on pyrolytic models only)
(on multifunction models only)
Cooking duration:
Commands locking:
Allows to set the time, select the cooking
Thermostat
temperature and duration and program the
Timer
cooking start and end times. On some models it
Knob
allows to turn on and off the oven lamp.
ON-OFF
Allows to switch the oven on and to select a
Functions
cooking or cleaning (where present) function.
Knob
Display
current
This display shows the current time, or the
time
cooking duration or the temperature.
procedures
The following symbols coming on indicate:
Comes on when the cleaning cycle is used, to
light
indicate the door has been locked.
:
Clock
Adjusting the cooking time
(displayed during adjustments)
:
Bell:
Minute minder activated.
Setting the cooking time.
Commands locking mode on.
Delayed start:
Setting the cooking time with a delayed start.
47