Smeg SC106-2 Instructions Manual page 11

Instructions for the user
7.7 Programmed cooking procedures
7.7.1 Cooking with the minute minder
In the stand-by position (see point "7.4 Operating modes"), press PT1
once. The display will show the figures (constantly on) and the
symbol (flashing). Turn PT1 to set the minutes of cooking (from 00:01 to
04:00:00). After a few seconds, the symbol will stop flashing and stay
on constantly; the countdown will start from that moment. At this point it is
also possible to select the desired cooking function and wait for the buzzer
to sound, indicating that the cooking time is over.
Press PT1 once to stop the buzzer. You can now set an additional cooking
time by turning PT1, or return to display the current time by pressing PT1
twice.
Turn PT2 to the "0" symbol to switch off the oven.
The minute minder also works with no function set.
Warning. The minute minder does not stop the cooking process. It only
warns the user that the preset number of minutes have passed.
To switch the oven off, turn PT2 to the "0" symbol.
Modifying the data set
Once the countdown has started it is possible to change its duration
during cooking.
When the symbol is steady, press PT1 once. The symbol starts
flashing and PT1 can be turned to change the set duration. A few seconds
after the last change, the symbol will stop flashing, and the countdown
will restart from the new value.
To change the preset temperature, wait for the symbol to become
steady and turn PT1 to the right or left to increase or decrease the cooking
temperature.
To modify the cooking duration in stand-by position simply turn PT1 to the
right or left in order to increase or decrease the selected temperature.
50