Table of Contents
Advertisement
9.2 Removing the door
Lift the levers B until they touch the hinges A and take hold of the two
sides of the doors with both hands close to the hinges. Raise the door to
an angle of about 45° and remove it. To reassemble, fit the hinges A into
their grooves, then lower the door into place, ensuring that it remains
fitted into the grooves C, then release the levers B.
9.3 Oven door seals
To permit thorough cleaning of the oven, the seal
may be removed. Before removing the seal, take off
the door as described above. Once the door has
been taken off, lift the tabs at the corners as shown
in the figure.
When cleaning is completed replace the seal, holding
the longest side horizontally, and insert the tabs into
their respective holes, starting with the top ones.
54
Instructions for the user
Advertisement
Table of Contents
