Table of Contents
Advertisement
1-2-2. Using the Relay Cable (VHJ-0106)
The mechanism
can be repaired without using the relay
cable (VHJ-0106). As shown
in Fig. 1-2-2, the relay cable
(VHJ-0106) is a tool used for relay between the CP-1 PWB
assembly and mechanism unit.
Je
tee VM-1 (VP-1) PWB
When connecting it, take note of the pin number of the
IN
assembly
connector.
CU
NOTE 1: Do not place the mechanism upright as shown in
Fig. 1-2-2 when inserting/ejecting the cassette.
NOTE 2: For NTSC models, be sure to connect the VM-1
PWB assembly and CP-1 PWB assembly.
Note : Since this set is for PAL system only, a service Jig
for NTSC system cannot be used with this set.
Relay cable:
VHJ-0106
Mechanism
unit
CP-1 PWB assembly
Fig. 1-2-2
2. AN OVERVIEW OF THE MECHANISM
2-1. NAMES OF THE MAIN PARTS
2-1-1. CASSETTE MECHANISM
ASSEMBLY
Tray
lock
~~
spring
[
Under frame
Pinion gear
Door
opene
lever
Gear holder
Drive gear
Fig. 2-1-1
Advertisement
Table of Contents
