Table of Contents
Advertisement
VHF/UHF
Use an RFCS
-
.
external cable (not
{
supplied), 8m (25 ff).
~ Fetype
"Jong, If the supplied
connector
75h Coaxial cable
7 wen supplied)
jg nottong enough.
75-ohm coaxial
cable *
(supplied)
EAC-66 U/V
band separator
75-ohm coaxial
cable (supplied)
VHF/UHF
1 Disconnect the TV antenna cable from the TV and
connect it to the VCR.
2 Connect the VCR and the TV.
It your TV has a single terminal for the VHF/UHF
antenna
Connect directly using the supplied 75-ohm coaxial
cable.
If your TV has separate VHF/UHF antenna terminals
Use a U/V band separator.
How to attach the U/V band separator and the F-type
connector
See page 17.
If the antenna cable is a
300-ohm twin lead (flat)
type
Antenna connector
(supplied)
If the antenna cable is a
75-ohm coaxial (round)
type
F-type connector
(not supplied)
1 Disconnect the TV antenna cable from the TV and
connect it to the VCR.
If the antenna cable is a 75-ohm coaxial (round) type
Use an F-type connector (not supplied).
lf the antenna cable is a 300-ohm twin lead (flat) type
Use the antenna connector (supplied).
2 Connect VHF/UHF OUT on the VCR and the VHF
antenna terminal on the TV with the 75-ohm coaxial
cable (supplied).
How to attach the antenna connector and an F-type
connector
See page 17.
1 3
Advertisement
Table of Contents
