Familiarization - Culligan Iron-Cleer Plus Owner's Manual

Familiarization

Power Loss
The AccuSoft circuit board is equipped with a Hi-Cap Capacitor and EEPROM memory chip. The
®
capacitor is capable of maintaining the time, for at least two days, in the event of a power outage.
The EEPROM ensures that the individual programming parameters of your filter are not lost.
If the power outage lasts long enough to drain the Hi-Cap Capacitor, the control will flash "12:00
PM" when power is returned to the control. The unit will continue to keep time from the moment
power is restored, and will initiate a full regeneration at the preset regeneration time. The time of day
will need to be reset in order to return the regeneration to its preset time.
If you live in an area where power outages occur with a regular frequency, a battery backup option
is available for ensuring that the time of day is properly maintained. Contact your Culligan Dealer for
more information.
Regeneration
To initiate a regeneration at the preset time, press the "REGEN" button. The "REG" light will light. To
initiate an immediate regeneration, press and hold the "REGEN" button for at least three seconds. The
"REG" will light and blink. An immediate regeneration will also occur if a power outage has lasted
for more than three hours and the Immediate Regeneration option is chosen. Ask your Culligan Dealer
about this feature.
A regeneration at the Time of Regeneration will occur if so signaled by the Soft-Minder meter. The
"REG" enunciator on the display will also be lit.
Service
Culligan's Iron-Cleer water filter is equipped with a self diagnostic program to insure optimal
®
operation of your water filter. Should service become necessary, a phone icon will appear in the
display. If this condition occurs, call your local Culligan Dealer for assistance. The phone icon and
error code will be the only items displayed when service is required on the control.
5