Table of Contents
Advertisement
Recommended
Preventative
Maintenance
14
The Culligan Iron Cleer water filter has been designed to provide a good, consistent service life.
Because of the nature of problem water, we recommend that the local Culligan dealer provide regular
maintenance/service contracts for the proper operation of your systems. The water filter service
begins with a multi point inspection of your water filter system in an effort to uncover any and all
problems that may exist. Listed below is a recommended list of maintenance items to be inspected at
a minimum of once a year (or more frequently depending on the raw water quality).
Test Water
Comments:
Bypass Valve
Bypass in Service or Bypass?
Condition of bypass valve
Operation OK?
Control Valve
Condition of Seal Pack
Condition of Solenoid Valve
Condition of Motor:
Condition of Flow Control
Condition of Switches:
Condition of Check Valve
Condition of Shuttle Valve
Condition of Compressor
Control settings
Check /reset Circuit Board
Check time of regeneration
Time delay relay setting "On Time" in seconds
Time delay relay setting "Off Time" in minutes
Backwash minutes
Fast Rinse minutes
Cycle control
Media Tank
Freeboard inches:
Media Condition
Feed
Hardness
Iron
Hydrogen Sulfide
Chlorine
TDS
Other
Before
Product
Output PSI
After
Test Cycle
OK?
Backwash
Fast rinse
Advertisement
Table of Contents
