Add Camera - Night Owl BWNIP2 Series User Manual

9.2.2 Add Camera

1
2
3
11
Protocol: Establishes the protocol used by the Wi-Fi NVR when it is looking for cameras to pair with.
1
Table 1: Shows the cameras available to pair with the Wi-Fi NVR.
2
Table 2: Shows the cameras already paired to the Wi-Fi NVR.
3
Wireless Add: Initiates the discovering and pairing process for available wire free cameras.
4
Add All Cameras: Pairs all cameras in Table 1 with the Wi-Fi NVR and places those cameras in Table 2,
5
so long as the number of cameras in Table 1 does not exceed the number of available channels on the
Wi-Fi NVR. This option also pairs cameras that are not in the same network segment as the Wi-Fi NVR.
Edit: Allows the network parameters of the cameras in Table 1 to be modified.
6
Advance: Allows advanced options to be Enabled or Disabled.
7
Delete: Will delete the selected camera from Table 2 and move it to Table 1.
8
Delete All: Will delete all cameras from Table 2 and move them to Table 1.
9
Manual Edit: Allows the channel connection parameters of the cameras in Table 2 to be modified.
10
Arrows: Allows you to move the selected camera to a different channel.
11
35
4
5
6
7
8
9
10