Safety Instructions - Night Owl BWNIP2 Series User Manual

Safety Instructions

USE THE PROVIDED POWER ADAPTER.
Do not use this product with a power source that applies more than the specified voltage.
NEVER INSERT METAL INTO THE Wi-Fi NVR CASE OR ITS OPENINGS.
Inserting metal into the Wi-Fi NVR case may cause electric shock.
DO NOT OPERATE IN WET OR DUSTY AREAS.
Avoid placing the Wi-Fi NVR in areas such as a damp basement or dusty attic.
DO NOT EXPOSE THE Wi-Fi NVR TO RAIN OR USE NEAR WATER.
If the Wi-Fi NVR accidentally gets wet, unplug it and contact technical support immediately.
KEEP PRODUCT SURFACES CLEAN AND DRY.
To clean the outside case of the Wi-Fi NVR, use a lightly dampened cloth. Do not use cleaning solutions
or solvents.
DO NOT INSTALL NEAR ANY HEAT SOURCES.
Do not install the Wi-Fi NVR near any heat sources such as stoves, heat registers, radiators or electronics (including
amplifiers) that produce heat.
UNPLUG THE Wi-Fi NVR WHEN MOVING IT.
Make sure that the Wi-Fi NVR is unplugged before you move it. When moving this device, be sure to handle it
with care.
MAKE SURE THERE IS GOOD AIR CIRCULATION AROUND THE Wi-Fi NVR.
This Wi-Fi NVR uses an internal hard drive, which generates heat during operation for video storage. Do not block
vents on the Wi-Fi NVR, as these vents reduce the generated heat while the system is running. Place this product
in well-ventilated area.
DO NOT ATTEMPT TO REMOVE THE TOP COVER.
If you observe any abnormal operation, unplug the Wi-Fi NVR immediately and contact technical support. Do not
attempt to open the Wi-Fi NVR to diagnose the cause of the problem.
HANDLE THE Wi-Fi NVR CAREFULLY.
If you drop the Wi-Fi NVR on any hard surface, it may damage the device. If the Wi-Fi NVR doesn't work properly
due to physical damage, contact an authorized dealer for repair.
IT IS RECOMMENDED TO USE YOUR Wi-Fi NVR WITH AN UNINTERRUPTIBLE POWER SUPPLY (UPS).
CAUTION!
You may be subjected to severe electrical shock if you remove the cover of the Wi-Fi NVR.
5