Add Camera - Night Owl WNVR201 Series User Manual

8.2.2 Add Camera

1
2
3
13
Protocol: Establishes the protocol used by the NVR when it is looking for cameras to pair with.
1
Table 1: Shows the cameras available to pair with the NVR.
2
Table 2: Shows the cameras already paired to the NVR.
3
Wireless Add: Initiates the discovering and pairing process for available wireless cameras.
4
Add All Cameras: Pairs all cameras in Table 1 with the NVR and places those cameras in Table 2, so
5
long as the number of cameras in Table 1 does not exceed the number of available channels on the
NVR. This option also will allow pair cameras that are not in the same network segment as the NVR.
LAN Search: Initiates the discovery of cameras over the same network segment where the NVR is
6
connected.
Edit: Allows the network parameters of the cameras in Table 1 to be modified.
7
Advance: Allows advanced options to be Enabled or Disabled.
8
Delete: Will delete the selected camera from Table 2 and move it to Table 1.
9
Delete All: Will delete all cameras from Table 2 and move them to table 1.
10
Manual Edit: Allows the channel connection parameters of the cameras in Table 2 to be modified.
11
Repeater: Opens a window which allows for an extended network to be built, using the cameras as
12
repeaters of the Wi-Fi signal.
Arrows: Allows you to move the selected camera to a different channel.
13
56
4
5
6
7
8
9
10
11
12