Chapter 3: Startup Wizard; Connected To The Internet - Night Owl BWNIP2 Series User Manual

Chapter 3: Startup Wizard

If you are NOT connecting your Wi-Fi NVR to the Internet, follow the onscreen steps for
updating firmware, device registration, and pairing cameras. Then, skip to "I Don't Want to
Connect the Wi-Fi NVR to the Internet."

3.1 Connected to the Internet

When prompted, log in using the Night
A
Owl Protect App credentials created in
Step 2.
NOTE: The Wi-Fi NVR is automatically added
to the Night Owl Protect App when you log in
using your Night Owl Protect credentials.
Follow the onscreen steps to pair the
B
cameras to the Wi-Fi NVR.
NOTE: When powered on, the cameras are
in pairing mode (Green Status Light flashes
rapidly). Refer to the "Pairing Mode" section
if a camera is not in pairing mode. The
battery camera's Status Light is on the face
of the camera.
Make sure you see all of the cameras
C
in the Live View before completing the
Startup Wizard.
12