Table of Contents
Advertisement
3-3-5. Password Setting
Password can be set at program start-up to maintain confidentiality. [Initial value: 0000]
(1)
3-3-5-1. Change Password
3-3-5-2. Password Setting
6
5
(3)
(2)
3
4
7
(1) Tap the MENU button.
(2) Tap the [Preference].
(3) Tap the [Password Setting].
Functions targeted by password setting
"Group Setting"
"Outdoor Unit"
"Preference"
"Maintenance"
"Installer Setting"
"Schedule Setting"
"Operation Setting"
(4) Select the process from the submenu below.
No.
Item
Changes the password. [Initial value:
"Change
0000]
Password"
→Refer to 3-3-5-1.
"Change
Changes the password setting.
Setting"
→Refer to 3-3-5-2.
(1) Set the item and tap the [OK] button.
No.
Item
"Change
Sets 4 to 8 digits password when it is
Password"
set. (Enter the password twice.)
(1) Set the item and tap the [OK] button.
[Initial value: All "Enable"]
No.
Item
"Group Setting" "Enable" / "Disable"
"Outdoor Unit
"Enable" / "Disable"
Settings"
"Preference"
"Enable" / "Disable"
3
"Maintenance" "Enable" / "Disable"
4
"Installer
"Enable" / "Disable"
5
Setting"
"Schedule
"Enable" / "Disable"
6
Setting"
"Operation
"Enable" / "Disable"
7
Setting"
Description
Description
Description
En-37
Advertisement
Table of Contents
