Password Configuration; Name Of Parts; Before Operation Or Setting; Wake The Controller - Fujitsu UTY-RVRU Operation Manual

Table of Contents

Advertisement

1-2-2
Password configuration
This unit can set the following 2 kinds of passwords:
(a) Admin password
This is a password for administrator. Password is re-
quested by the setting which requires management. For
a description of password setting and change, refer to [5
Setting] →[5-2 Initial setting]→[5-2-2 Admin password] .
(b) Installer password
This password is requested for important settings at
installation.
NOTE
If you forget your password, contact your local dealer.

1-3 Name of parts

(d)
(a) Touch screen
It can be operated by tapping or swiping.
NOTE
Operate with your finger or stylus pen (not included). Do
not touch the screen with a hard or sharp object as it may
cause a malfunction.
(b) Ambient light sensor
Detects the brightness around the controller.
(c) Operation lamp
It is lights up in a color according to the operation mode
while indoor unit operating. Light goes out while stopped.
Blinks when an error is detected.
Lighting
Blue
Green
color
Operation
Cool
Dry
mode
NOTE
The operation lamp can be turned off at all times. For
details, refer to "5-3-8 Operation Lamp".
(d) Room temperature sensor (inside)
Detects the temperature around the controller.
(a)
(b)
(c)
Red
Purple
White
Heat or
Custom
Fan
Minimum
auto
heat

1-4 Before operation or setting

1-4-1

Wake the controller

If the standby screen is displayed, tap the screen to display
the temperature setting screen (home screen).
1-4-2

Standby mode screen

The standby mode screen varies depending on the settings.
■ Example of standby mode screen
(a)
(a) Remote controller group name
(b) Room temperature (Fahrenheit or Celsius)
NOTES
• If there is no operation for a certain period of time, the
controller will display the standby mode screen.
• The time until the standby mode can be set to 30 sec-
onds, 60 seconds, 90 seconds, or 120 seconds. For
details, refer to "5-3-7-4 Automatic Off Time".
1-4-3

Child safety lock

If you tap the screen and
this screen is displayed,
the child safety lock was
set.
Release the child safety
lock to operate or setting
the controller.
■ Child safety lock set/release:
Press and hold the information area on the main screens for
5 seconds or longer to set/release the child safety lock.
(b)
En-4

Advertisement

Table of Contents
loading

Table of Contents