b.
Disconnect the volume board cable from the board.
Step
Screw (quantity)
3
M2 × L2.5 mm, flat-head, nylon-coated (2)
Step 2.
Install the volume board and cable in reverse order.
Hook holder for bezel
Follow the instructions to replace the hook holder for bezel.
For access, remove these FRUs in order:
• "LCD module" on page 56
• "Built-in battery" on page 60
• "Volume board and cable" on page 67
Step 1.
Remove the hook holder for bezel as shown below.
68
ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual
Color
Torque
Black
0.181 Nm
(1.85 kgf-cm)