Usb-C Board And Cable - Lenovo ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual

For access, remove this FRU:
• "LCD module" on page 56
Step 1. Loosen the screws and then remove the USB-C board bracket.
Step Screw (quantity)
1
M2 × L2.5 mm, flat-head, nylon-coated (2)
Step 2. Install the USB-C board bracket in reverse order.

USB-C board and cable

Follow the instructions to replace the USB-C board and cable.
For access, remove these FRUs in order:
• "LCD module" on page 56
• "Built-in battery" on page 60
• "USB-C board bracket" on page 69
Step 1. Remove the USB-C board and cable as shown below.
a. Disconnect the connector. Loosen the screw and then remove the USB-C board and cable.
70
ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual
Color Torque
Black 0.181 Nm
(1.85 kgf-cm)