How To Remove The System Management Password; Power Management; Sleep Mode - Lenovo ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual

Table of Contents

Advertisement

a new storage drive to replace the old one by yourself. To check whether the storage drive is a CRU and the
relevant replacement procedure, see "Major FRUs and CRUs" on page 45.

How to remove the system management password

To remove a system management password, do the following:
How to remove the system management password if no supervisor password has
been set
Step 1.
Turn off the computer and disconnect ac power.
Step 2.
Remove the LCD module. See "LCD module" on page 56.
Step 3.
Remove the built-in battery. See "Built-in battery" on page 60.
Step 4.
Reinstall the built-in battery.
Step 5.
Reinstall the LCD module.
Step 6.
Reconnect ac power.
Step 7.
Turn on the computer and wait until the POST ends. After the POST ends, the password prompt
does not appear. The system management password has been removed.
If a supervisor password has been set and is known to the service technician, do the
following to remove the system management password
Step 1.
Turn on the computer.
Step 2.
When the ThinkPad logo is displayed, immediately press F1.
Step 3.
Type the supervisor password to enter the ThinkPad Setup program.
Step 4.
Select Security.
Step 5.
Select Password.
Step 6.
Select System Management Password.
Step 7.
Type the current supervisor password in the Enter Current Password field. Then leave the Enter
New Password field blank, and press Enter twice.
Step 8.
In the Changes have been saved window, press Enter.
Step 9.
Press F10 to save changes and exit the ThinkPad Setup program. The system management
password has been removed.

Power management

To reduce power consumption, the computer has two power management modes: sleep and hibernation.

Sleep mode

When the computer enters sleep mode, the screen goes blank and all internal devices are still powered on
with lower power consumption.
To enter sleep mode, press Fn+4 or open the Start menu.
In certain circumstances, the computer goes into sleep mode automatically:
• After a period of inactivity specified in power plan settings
• When the battery power is low
To resume the computer from sleep mode, press the power button.
30
ThinkPad X12 Detachable Gen 2 Hardware Maintenance Manual

Advertisement

Table of Contents
loading

This manual is also suitable for:

21lk21ll

Table of Contents