Keyboard Bezel Assembly - Lenovo ThinkPad L13 2-in-1 Gen 5 Hardware Maintenance Manual

Step Screw (quantity)
6
M 2.5 × 4.5 mm, flat-head, nylon-coated (4)
Step 2. Install the smart card reader in reverse order. When installing, ensure that the connectors are
attached firmly.
Attention: When you route the cables, ensure that they are not subject to any tension. Tension
could cause the cables to be damaged by the cable guides, or a wire to be broken.

Keyboard bezel assembly

Follow the instructions to replace the keyboard bezel assembly.
For access, remove these FRUs:
• "ThinkPad Pen Pro (for ThinkPad L13 2-in-1 Gen 5 only)" on page 62
• "Base cover assembly" on page 63
92
ThinkPad L13 Gen 5,ThinkPad L13 2-in-1 Gen 5 and ThinkPad S2 Gen 9 Hardware Maintenance Manual
Color Torque
Silver 0.294 Nm
(3.0 kgf-cm)