Operation; Check Of Safety Devices For Starting The Robot Lawn Mower - Stiga G 300 Instruction Manual

5.

OPERATION

Requirements and obligations:
• Installation completed according to
instructions (See Ch. 4)
• Powered charging base
• Battery charged (See Par. 5.5)
5.1.

CHECK OF SAFETY DEVICES FOR STARTING THE ROBOT LAWN MOWER

Requirements and obligations:
• Safety key.
Procedure:
1. Check that the floating cover (A) is fitted correctly. If the cover is missing the robot lawn mower doesn't
work.
2. Check that the safety key (E) is inserted. If it is not inserted the robot lawn mower doesn't start.
3. Check that the stop button "
opens the protective cover (C) of the control console (D).
4. Check that the robot lawn mower is positioned on the ground correctly. In the event of excessive tilting
(≥ 45% or >= 50%) and lifting, the tilt sensors (inclinometer) will stop the robot lawn mower.
38
5. OPERATION
• Programming the robot lawn mower
according to the instructions (See Par. 4.7 for
automatic function)
• Initial grass height in the range of operation
of the robot lawn mower: 20-60 mm
• Cutting height suitably adjusted (See
Par. 5.6).
STOP
" (B) is not active. If pressed, it stops the robot lawn mower and
B D E
A
C
EN